The 2025 Burton Mens Step On Split Binding bring the convenience and ease of the Step On system to backcountry adventures. By using the user-friendly Spark Tesla mounting system found in their Hitchhiker binding, the Step On version of this binding offers swift connection from your boot to your binding, establishing a reliable connection between the heel of your boot and your binding so touring mode is easy and efficient. This provides a strong stride along the skin track and minimising boot wear. This streamlined processes result in quicker transitions, allowing more time spend exploring the backcountry.
* Step On boots must match the size of your bindings. See our size guide below for more information. *
Binding Type: Backcountry / Splitboard
Board Compatibility: Compatible with splitboards using Spark pucks, Spark canted pucks, or Voile pucks.
Pucks sold separately.
Flex (1 - Soft / 10 - Stiff): 7/10
Baseplate: Spark R&D Tesla T1 with Step On compatibility
The Tesla T1 machined aluminium baseplate is pin and cable free, to easily slide into offset touring brackets and locks in place with a snap ramp. The Step On system creates an effective boot to binding interface allowing you to step right into your binding.
High Back: Burton-Designed Step On Split Quick FLAD with Negative Lean
The binding highback is responsive for the ride down, and comfortable for the hike up. Featuring a quick adjust FLAD with negative lean, you can make each step go further, and make each turn come quicker, without needing tools.
Additional Features:
Whammy Bar Climbing Wire:
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes. Easily switch between stowed, low (12°), and high (18°) and back again.
Snap Ramps and Side-Lock Tesla Touring Brackets:
T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp, negating the need for pins and cables. Integrated Ibex crampon mounting claws on touring brackets make for quick and easy installation and removal.
Puck Compatibility:
Slide them on and snap the ramp down, or snap the ramp up and slide them off, regardless of whether you're putting them on or taking them off, it'll be super easy and quick. When used with Spark Tesla system bindings you'll be able to conveniently access puck screws with the bindings in place for precise stance adjustment. Pucks sold separately.
T1 Heel Rest:
The T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 step locker in place.
